TGI API Documentation

Generated on Wed Feb 4 11:22:06 CST 2009

Category Index

Abstraction Definition Operations Abstractor Instance Operations Abstractor Operations
Address Map Operations Bus Definition Operations Bus Interface Operations
Component Instance Operations Component Operations Constraint Operations
Design Operations Field Operations File and Fileset Operations
Generator Operations Interface Operations Miscellaneous Operations
Port Operations Register File Operations Register Operations
Remap Operations Service Operations TypeDef Operations
View Operations Whitebox Operations All ID Types

Abstraction Definition Operations

NameDescriptionCompatability
Restrictions
getAbstractionDefID ID for the abstraction definition with the given VLNV  
getAbstractionDefVLNV Vendor Library Name Version of the abstraction definition  
getAbstractionDefBusTypeVLNV Get VLNV of the bus definition  
getAbstractionDefPortIDs List of abstraction definition port element IDs  
getAbstractionDefPortLogicalName Logical name of this abstraction definition port  
getAbstractionDefPortRequiresDriver Does this port require a driver  
getAbstractionDefPortRequiredDriverType Required driver type for this port  
getAbstractionDefPortStyle Returns 'wire' or 'transactional' to indicate the port style  
getAbstractionDefPortIsAddress Is this port an address port  
getAbstractionDefPortIsData Is this port a data port  
getAbstractionDefPortIsClock Is this port a clock port  
getAbstractionDefPortIsReset Is this port a reset port  
getAbstractionDefPortModeID Returns an array of IDs for accessing the given port in the given interface mode. The array shall only contain one element. Modified in 1.5
getAbstractionDefPortModeGroup Group name when present on a system interface  
getAbstractionDefPortModeBitWidth Bit width constraint when present on an interface of the given type  
getAbstractionDefPortModeDirection Port direction constraint when present on an interface of the given type  
getAbstractionDefPortNonMirroredConstraintIDs List of constraint IDs for a non-mirrored port  
getAbstractionDefPortMirroredConstraintIDs List of constraint IDs for a mirrored port  
getAbstractionDefPortDriveConstraintIDs List of drive constraint IDs of the port  
getAbstractionDefPortLoadConstraintIDs List of load constraint IDs of the port  
getAbstractionDefPortTimingConstraintIDs List of timing constraint IDs of the port  
getAbstractionDefPortDefaultValue Default value for port when not connected  
getAbstractionDefPortModePresence Existence requirement for this port on an interface of the given type  
getAbstractionDefPortModeServiceIDs AbstractionDef service IDs on a transactional port Invalid in 1.5
getAbstractionDefPortModeServiceID AbstractionDef service ID on a transactional port New in 1.5

Abstractor Instance Operations

NameDescriptionCompatability
Restrictions
getAbstractorInstanceName Instance name of the abstractor  
getAbstractorInstanceVLNV Vendor Library Name Version of the abstractor (from the design file)  
getAbstractorInstanceAbstractorID ID for the abstractor associated with given instance (crossing from design configuration to abstractor file)  
getAbstractorInstanceXML Return the abstractor XML in text format. Schema version is DE dependent.  

Abstractor Operations

NameDescriptionCompatability
Restrictions
getAbstractorAbstractorMode Get the mode that the abstractor can be master, slave, direct or system.  
getAbstractorBusTypeVLNV List of VLNV of the bus definition  
getAbstractorAbstractorInterfaceIDs List of 2 interface IDs  
getAbstractorViewIDs A list of model view IDs  
getAbstractorPortIDs A list of abstractor model port IDs  
getAbstractorModelParameterIDs A list of model parameter IDs  
getAbstractorGeneratorIDs List of generator IDs of the abstractor  
getAbstractorChoiceIDs List of choices IDs  
getAbstractorFileSetIDs List of file set IDs  

Address Map Operations

NameDescriptionCompatability
Restrictions
getAddressSpaceRange The address range of an address block expressed as the number of accessable and addressable units., Configurable  
getAddressSpaceWidth The bit width of an address block., Configurable  
getAddressSpaceLocalMemoryMapID The ID for the local mamory map of the address space. New in 1.5
getAddressSpaceSegmentIDs List of IDs for address block segments for the address space. New in 1.5
getSegmentAddressOffset The address offset of an address space segment in an address space, Configurable New in 1.5
setSegmentAddressOffset Set the address offset of an address space segment expressed in the number addressable units. New in 1.5
getSegmentRange The address range of a address space segment expressed as the number of accessable addressable units., Configurable New in 1.5
setSegmentRange Set the address range of an address space segment expressed as the number of accessable addressable units. New in 1.5
getAddressSpaceAddressUnitBits The number bits in an addressable unit. If none exists, the default 8 bits is returned.  
getExecutableImageIDs The IDs of the executable images belonging to the specified address space.  
getExecutableImageType The type of the executable image if existent.  
getExecutableImageLinkerCommand The linkder command for the current executable image., Configurable  
getExecutableImageLinkerFlags The flags of the current executable image linker command., Configurable  
getExecutableImageLinkerCommandFileID Element ID of linkerCommandFile associated with given executable image.  
getExecutableImageFileBuilderIDs List of default file builder IDs of the executable image  
getExecutableImageFileSetIDs The group of file set reference IDs complying with the tool set of the current executable image.  
getLinkerCommandFileName The name of the linker command file., Configurable  
getLinkerCommandFileLineSwitch The command line switch to specify with the linker command file., Configurable  
getLinkerCommandFileEnable Indicates whether or not to generate and enable the linker command file., Configurable  
getLinkerCommandGeneratorIDs Reference IDs to the generator elements for generating the linker command file.  
getMemoryMapElementIDs List of element IDs (addressBlockID, bankID, subspaceMapID) within a memory map, memory remap, local memory map, or bank Modified in 1.5
getMemoryMapElementType Indicates type of memory map element: addressBlock, bank or subspaceMap  
getMemoryMapAddressUnitBits The number bits in an addressable unit for a memory map. If none exists, the default 8 bits is returned.  
getAddressBlockBaseAddress The base address of an address block, Configurable  
getAddressBlockTypeIdentifier Indicates the type identifier of this address block. New in 1.5
getAddressBlockRange The address range of an address block expressed as the number of accessable and addressable units., Configurable  
getAddressBlockWidth The bit width of an address block in the local memory map., Configurable  
getAddressBlockUsage Indicates the usage of this address block.  
getAddressBlockVolatility Indicates whether or not the data is volatile.  
getAddressBlockAccess The accessibility of the data in the local address block.  
getAddressBlockRegisterIDs The IDs of the available registers in the address block.  
getAddressBlockRegisterFileIDs The IDs of the available register files in the address block. New in 1.5
getBankAlignment The bank alignment value, serial or parallel  
getBankBaseAddress The base address of an address bank, Configurable  
getBankUsage Indicates the usage of this address bank.  
getBankVolatility Indicates whether or not the data is volatile.  
getBankAccess The accessibility of the data in the local address bank.  
getSubspaceMapMasterID Master bus interface ID on the other side of a bus bridge .  
getSubspaceMapSegmentID Address space segment ID on the other side of a bus bridge . New in 1.5
getSubspaceMapBaseAddress The base address of a memory subspace, Configurable  
getMemoryMapRemapElementIDs List of IDs for memory map 'remap' elements of the given memory map  
getMemoryRemapStateID Remap State ID for which this remap is applicable  
setAddressSpaceRange Set the address range of an address block expressed as the number of accessable and addressable units.  
setAddressSpaceWidth Set the bit width of an address block.  
setExecutableImageLinkerCommand Set the linkder command for the current executable image.  
setExecutableImageLinkerFlags Set the flags of the current executable image linker command.  
setLinkerCommandFileName Set the name of the linker command file.  
setLinkerCommandFileLineSwitch Set the command line switch to specify with the linker command file.  
setLinkerCommandFileEnable Set whether or not to generate and enable the linker command file.  
setAddressBlockBaseAddress Set the base address of an address block  
setAddressBlockRange Set the address range of an address block expressed as the number of accessable and addressable units.  
setAddressBlockWidth Set the bit width of an address block  
setBankBaseAddress Set the base address of an address bank  
setSubspaceMapBaseAddress Set the base address of a memory subspace  

Bus Definition Operations

NameDescriptionCompatability
Restrictions
getBusDefinitionID ID for the bus definition with the given VLNV  
getBusDefinitionVLNV Vendor Library Name Version of the bus definition  
getBusDefinitionDirectConnection Indicates whether or not the bus definition supports direct connections  
getBusDefinitionIsAddressable Indicates whether or not the bus definition is an addressable bus  
getBusDefinitionExtends Vendor Library Name Version of the bus definition being extended  
getBusDefinitionMaxMasters Maximum # of masters supported by this bus definition  
getBusDefinitionMaxSlaves Maximum # of slaves supported by this bus definition  
getBusDefinitionSystemGroupNames List of system group names for this bus definition  

Bus Interface Operations

NameDescriptionCompatability
Restrictions
getBusInterfaceMasterAddressSpaceID ID of the master addressSpace  
getBusInterfaceMasterBaseAddress Base address of the master addressSpace, Configurable  
getBusInterfaceSlaveMemoryMapID ID of the memoryMap referenced from a slave interface  
getBusInterfaceSlaveBridgeIDs List of slave bridge IDs  
getBridgeMasterID The slave interface master interface reference ID  
getBridgeIsOpaque Value of the opaque attribute  
getBusInterfaceSlaveFileSetGroupIDs List of fileSetGroup IDs  
getBusInterfaceGroupName Group name of a system, mirroredSystem, or monitor bus interface  
getBusInterfaceMirroredSlaveRemapAddressIDs List of remap address IDs of the mirrored slave interface  
getRemapAddressValue Remap address of the given remap address element  
getRemapAddressRemapStateID Remap state ID of the given remap address element  
getBusInterfaceMirroredSlaveRange The address range of the mirrored slave interface  
getBusInterfaceMonitorInterfaceMode Indicates the mode of interface being monitored, slave, master, system, mirrorslave, mirrormaster or mirrorslave  
getBusInterfaceConnectionRequired Connection required for this bus interface  
getBusInterfaceBitSteering BitStreering description of the bus interface: on or off, Configurable  
getBusInterfaceEndianness The endianess of the bus interface, big or little. The default is little.  
getBusInterfaceBitsInLAU The number bits in the least addressable unit. If none exists, the default 8 bits is returned.  
setBusInterfaceMasterBaseAddress Set base address of the master bus interface.  
setRemapAddressValue Set remap address value for the associated interface.  
setBusInterfaceMirroredSlaveRange Set address range for the associated interface.  
setBusInterfaceBitSteering Set bus interface bit steering value.  

Component Instance Operations

NameDescriptionCompatability
Restrictions
getComponentInstanceName Instance name of the component  
getComponentInstanceVLNV Vendor Library Name Version of the component (from the design file)  
getComponentInstanceComponentID ID for the component associated with given instance (crossing from design to component file)  
getComponentInstanceXML Return the component XML in text format. Schema version is DE dependent.  

Component Operations

NameDescriptionCompatability
Restrictions
getComponentVLNV Vendor Library Name Version of the component (from the component file)  
getComponentElementType Returns the name of the XML element associated with the component (currently only 'component'). This call is being provided to cover a future scenario where there can be different types of component elements instantiated in a design (e.g. macroComponent elements).  
getChannelBusInterfaceIDs List of busInterface IDs in this channel  
getComponentAddressSpaceIDs List of IDs for the logical address spaces in the component.  
getComponentRemapStateIDs A list of remap state IDs  
getComponentViewIDs A list of model view IDs  
getComponentBusInterfaceIDs List of interface IDs  
getComponentChannelIDs A list of channel IDs  
getComponentPortIDs A list of component model port IDs  
getComponentModelParameterIDs A list of model parameter IDs  
getComponentGeneratorIDs List of generator IDs of the component  
getComponentChoiceIDs List of choices IDs  
getComponentFileSetIDs List of file set IDs  
getComponentWhiteboxElementIDs List of whitebox element IDs of the component  
getComponentCpuIDs List of cpu IDs of the component  
getCpuAddressSpaceIDs List of address space reference IDs of the cpu  
getComponentOtherClockDriverIDs List of clock driver IDs of the component  
getComponentMemoryMapIDs List of IDs for memory map elements in the given component  

Constraint Operations

NameDescriptionCompatability
Restrictions
getPortConstraintSetReferenceName Reference name of the given port constraint set  
getPortConstraintSetRange List of the left and right range of a port referenced by this constraint set  
getPortConstraintSetDriveConstraintIDs List of drive constraint IDs of the port  
getPortConstraintSetLoadConstraintIDs List of load constraint IDs of the port  
getPortConstraintSetTimingConstraintIDs List of timing constraint IDs of the port  
getDriveConstraintType Indicates the type of drive constraint: function class  
getDriveConstraintValue Returns the drive constraint. Format depends on the constraint type.  
getLoadConstraintType Indicates the type of load constraint: function class  
getLoadConstraintValue Returns the load constraint. Format is cell function and strength or cell class and strength.  
getLoadConstraintCount Returns the load constraint count, the number of loads.  
getTimingConstraintClockDetails Indicates the clock name, clock edge, and delay type  
getTimingConstraintValue Returns the timing constraint value (cycle time percentage).  

Design Operations

NameDescriptionCompatability
Restrictions
getDesignID Get ID of the current or top design  
getDesignVLNV Vendor Library Name Version of the design  
getDesignComponentInstanceIDs Components instances IDs of the given design  
getComponentInstanceID Return the component instance ID of the named component instance in the given design  
getDesignInterconnectionIDs List of interconnection element IDs  
getInterconnectionActiveInterfaces Returns the active interfaces as a list: componentRef interfaceRef componentRef interfaceRef Modified in 1.5
getDesignInterconnectionAbstractorInstanceIDs List of abstractor instances IDs for this interconnection  
getDesignMonitorInterconnectionIDs List of monitorInterconnection element IDs  
getMonitorInterconnectionInterfaces Returns the active interface and monitor interfaces as a list in componentPathRef, componentRef, componentInterface, monitorPathRef, monitorRef, monitorInterface format, the active interface comes first in the list. Modified in 1.5
getDesignAdHocConnectionIDs List of ad-hoc connection element IDs  
getAdHocConnectionTiedValue Get the tied value for an ad-hoc connection  
getAdHocConnectionInternalPortReferenceIDs List of internal ad-hoc port reference element IDs  
getAdHocConnectionInternalPortReferenceDetails List for an internal connection containing the componentRef, portRef, left, and right attribute values  
getAdHocConnectionExternalPortReferenceIDs List of external ad-hoc port reference element IDs  
getAdHocConnectionExternalPortDetails List for an external connection containing the portRef, left, and right attribute values  
getDesignHierConnectionIDs List of hierarchical connection element IDs  
getHierConnectionDetails List containing the interface name, component reference, and interface reference  
addComponentInstance Add new component instance.  
removeComponentInstance Remove specified component instance.  
replaceComponentInstance Replace specified component with new provided component.  
appendAbstractorInstance Append a new abstractor instance to the interconnection.  
removeAbstractorInstance Remove specified abstractor instance.  
replaceAbstractorInstance Replace specified abstractor with new provided abstractor.  
addInterconnection Add new interconnection between components.  
removeInterconnection Remove interconnection between components, and any abstractors if present.  
addMonitorInterconnection Add new interconnection between a component and monitor. If there is already a monitorInterconnection for the given componentRef/componentInterfaceRef, then the monitor connection is added to that element.  
addHierarchicalMonitorInterconnection Add new hierarchical interconnection between a component and monitor. If there is already a monitorInterconnection for the given componentRef/componentInterfaceRef, then the monitor connection is added to that element. New in 1.5
removeMonitorInterconnection Remove interconnection between a component and monitor. When the last monitor reference is removed, the entire monitorInterconnection element will be removed.  
removeHierarchicalMonitorInterconnection Remove a hierarchical interconnection between a component and monitor. When the last monitor reference is removed, the entire monitorInterconnection element will be removed. New in 1.5
addHierConnection Add new hierarchical connection.  
removeHierConnection Remove existing hierarchical connection.  
addAdHocConnection Add new ad-hoc connection.  
addAdHocInternalPortReference Add an internal port reference to an existing add-hoc connection. An identical port reference must not already exist in the ad-hoc connection.  
addAdHocExternalPortReference Add an external port reference to an existing add-hoc connection.  
removeAdHocInternalPortReference Remove an internal port from existing ad-hoc connection. The ad-hoc connection is removed when the last port reference is removed.  
removeAdHocExternalPortReference Remove an external port reference from existing ad-hoc connection.  

Field Operations

NameDescriptionCompatability
Restrictions
getRegisterFieldBitOffset Bit offset of the fields LSB inside the register.  
getFieldTypeIdentifier Indicates the type identifier of this field. New in 1.5
getRegisterFieldBitWidth Width of the field in bits., Configurable  
setRegisterFieldBitWidth Set the width of the field in bits., Configurable  
getRegisterFieldVolatility Indicates whether or not the data is volatile. The presumed value is 'false' if the element is not present. Modified in 1.5
getRegisterFieldAccess The accessibility of the data in the field.  
getRegisterFieldValueIDs List of IDs for field values for the given register field.  
getRegisterFieldValueUsage Enumerated bit field usage. New in 1.5
getRegisterFieldValue Enumerated bit field value.  
getRegisterFieldValueName Enumerated name for this register field value. Deprecated - use getName.  
getFieldModifiedWriteValue The modified write value for the field New in 1.5
getFieldWriteValueConstraintWriteAsRead The write value constraint is write as read. New in 1.5
getFieldWriteValueConstraintUseEnumeratedValues The write value constraint shall use the enumerated values. New in 1.5
getFieldWriteValueConstraintMinMax The value of a write constraint. New in 1.5
getFieldReadAction The read action for the field New in 1.5
getFieldTestable True if the field can be tested with a simple register test. New in 1.5
getFieldTestConstraint The test constraint required if the field can be tested with a simple register test. New in 1.5

File and Fileset Operations

NameDescriptionCompatability
Restrictions
getFileSetGroupName Name of file set group  
getFileSetGroupFileSetIDs List of file set IDs in this file set group  
getFileName Get name of the given fileID., Configurable  
getFileBuilderFileType FileType or userFileType of the file builder  
getFileBuilderCommand Command of the file builder, Configurable  
getFileBuilderFlags Flags of the file builder, Configurable  
getFileBuilderReplaceDefaultFlags Value of the replaceDefaultFlags element of the file builder, Configurable  
getFileSetGroups List of group names of the file set  
getFileSetFileIDs List of file IDs of the file set  
getFileType FileType or userFileType of the file  
getFileIsIncludeFile Indicates that the given file is an include file  
getFileHasExternalDeclarations Indicates that the file includes external declarations required by the top-level netlist file  
getFileLogicalName Logical name of the file  
getFileLogicalNameDefault Default attribute of logical name of the file  
getFileExportedNames List of exported names of the file  
getFileBuildCommandName Name of the build command of the file , Configurable  
getFileBuildCommandFlags Flags of the file build command, Configurable  
getFileBuildCommandFlagsIsAppend Value of append attribute on the flag element  
getFileBuildCommandReplaceDefaultFlags Indicates whether or not to replace default flags, Configurable  
getFileBuildCommandTargetName Target name of the file build command , Configurable  
getFileDependencies List of dependent locations for the file, typically directories  
getFileDefineSymbolIDs List of define symbol IDs used in the file  
getFileImageTypes List of image types of the file  
getFileSetFileBuilderIDs List of file builder IDs used for this fileSet  
getFileSetDependencies List of dependent locations for the fileSet, typically directories  
getFileSetFunctionIDs List of function IDs  
getFunctionReplicate Value of replicate attribute on function element  
getFunctionEntryPoint Entry point of the function  
getFunctionFileID File ID containing the function entry point  
getFunctionReturnType Return type of the function  
getFunctionArgumentIDs List of argument IDs of the function of the file set  
getFunctionArgumentDataType Data type of the argument  
getFunctionDisabled Indicates whether or not the function is disabled , Configurable  
getFunctionSourceFileIDs List of source file IDs of the function of the file set  
getFunctionSourceFileName Name of the source file  
getFunctionSourceFileType FileType or userFileType of the source file  
setFileName Set name of the given file.  
setFileBuildCommandName Set command name for the given file builder.  
setFileBuildCommandFlags Set command flags for the given file builder.  
setFileBuildCommandReplaceDefaultFlags Set replace default flags for the given file builder.  
setFileBuildCommandTargetName Set target name for build command for the given file  
setFileBuilderCommand Set command associated with file builder.  
setFileBuilderFlags Set flags associated with the given file builder.  
setFileBuilderReplaceDefaultFlags Set value of replace default flags in file builder.  
setFunctionDisabled Set disable flag on function.  

Generator Operations

NameDescriptionCompatability
Restrictions
getGeneratorScope Scope of the generator  
getGeneratorIsHidden Value of hidden attribute on the generator  
getGeneratorPhase Phase number of the generator  
getGeneratorPhaseScope Scope of generator phase: local or global  
getGeneratorApiType Api type of the generator  
getGeneratorExecutable Executable name associated with the generator  
getGeneratorGroups List of group names of the generator  
getGeneratorTransportMethods List of transport methods of the generator  

Interface Operations

NameDescriptionCompatability
Restrictions
getInterfaceBusTypeVLNV List of VLNV of the bus definition  
getInterfaceAbstractionTypeVLNV List of VLNV of the abstraction definition  
getInterfaceMode Mode of the interface: master, slave, system, mirroredMaster, mirroredSlave, mirroredSystem or monitor  
getInterfacePortMapIDs List of interface port map IDs  
getLogicalPhysicalMapIDs List of the logical and physical port map IDs  
getPortMapRange List of left and right range of the port map, Configurable  
setPortMapRange Set left/right range of an interface port map.  

Miscellaneous Operations

NameDescriptionCompatability
Restrictions
getVendorExtensions Returns the complete XML text of the vendor extension element including the spirit:vendorExtension tag, as a well formed XML document.  
getVendorAttribute Get vendor defined attribute from the given element  
getParameterIDs List of parameter IDs from the given element (any which contains spirit:parameter elements)  
getValue Get the value of a parameterID, fileDefineIDs or argumentIDs., Configurable  
getValueAttribute Returns the value of the given attribute name on the elementID/value element  
getModelParameterDataType Data type of the model parameter  
getModelParameterUsageType Usage type of the model parameter  
getIdValue Return the value of the spirit:id attribute on a ID New in 1.5
getIDType Return the name of the ID type New in 1.5
getName Return the name of the specified element Modified in 1.5
getDescription Return the description of the specified element Modified in 1.5
getDisplayName Return the displayName of the specified element Modified in 1.5
getUnconfiguredID Return the unconfigured ID from a configured ID New in 1.5
getChoiceName Name of the choice  
getChoiceEnumerationIDs List of choice enumeration IDs of the choice  
getChoiceEnumerationValue Value of the enumeration element  
getChoiceEnumerationText Value of the enumeration text attribute  
getChoiceEnumerationHelp Value of the enumeration help attribute  
registerVLNV Indicate to DE where the file resides for the IP-XACT element with the given VLNV.  
getXMLForVLNV Return XML of the IP-XACT object identified by the given VLNV.  
getGeneratorContextComponentInstanceID ID for the component instance associated with the currently invoked generator  
init API initialization function. Must be called before any other API call.  
message Send message level and message text to Design Environment.  
getErrorMessage Get error message from prior callback.  
getWarningCount Return count of how many potentially incompatible API calls have been made.  
end Terminate connection to the Design Environment.  
setVendorExtensions Set vendor extensions. NOTE: This call is only supported for elements within a spirit:design.  
setVendorAttribute Set vendor defined attribute on the given element  
setValue Set the value of a parameterID, fileDefineIDs or argumentIDs.  

Port Operations

NameDescriptionCompatability
Restrictions
getPortStyle Returns 'wire' or 'transactional' to indicate the port style  
getPortDirection Direction of the port  
getPortRange List of the left and right range of the port  
getPortWireTypeDefIDs List of typeDefs for a wire portID New in 1.5
getPortTransactionalTypeDefID The type definition for a transactional portID New in 1.5
getPortServiceID ID of element representing the service of a transactional port  
getPortAccessType Indicates the access type for this port Modified in 1.5
getPortAccessHandle Alternate name to be used when accessing this port Modified in 1.5
getPortMaxAllowedConnections Max allowed connections for this transactional port  
getPortMinAllowedConnections Min allowed connections for this transactional port  
getPortDefaultValue Default value of the port, if not set returns "", Configurable  
getPortClockDriverID Element ID of clock driver element, if present  
getClockDriverPeriod Clock period of the given clock, Configurable  
getClockDriverPulseOffset Clock pulse offset of the given clock, Configurable  
getClockDriverPulseValue Clock pulse value of the given clock, Configurable  
getClockDriverPulseDuration Clock period of the given clock, Configurable  
getClockDriverName Name of the clock driver  
getClockDriverSource Source name of the clock driver  
getPortSingleShotDriverID Element ID of single shot driver element, if present  
getPortSingleShotPulseOffset Clock pulse offset of the port, Configurable  
getPortSingleShotPulseValue Clock pulse value of the port, Configurable  
getPortSingleShotPulseDuration Clock period of the port, Configurable  
getPortConstraintSetIDs List of constraint sets IDs of the port  
setPortRange Set left/right range for the given port.  
setPortDefaultValue Set default value of the given port.  
setClockDriverPeriod Set period of the given clock port.  
setClockDriverPulseOffset Set pulse offset value of the given clock port.  
setClockDriverPulseValue Set pulse value of the given clock port.  
setClockDriverPulseDuration Set pulse duration of the given clock port.  
setPortSingleShotPulseOffset Set pulse offset of given single shot port.  
setPortSingleShotPulseValue Set pulse value of given single shot port.  
setPortSingleShotPulseDuration Set pulse duration of given single shot port.  

Register File Operations

NameDescriptionCompatability
Restrictions
getRegisterFileDimensions Dimensions of a register file array. New in 1.5
getRegisterFileAddressOffset The offset from the base address. New in 1.5
getRegisterFileTypeIdentifier Indicates the type identifier of this register file. New in 1.5
getRegisterFileRange The register file range in number of addressable units., Configurable New in 1.5
setRegisterFileRange Set the register file range in addressable units., Configurable New in 1.5
getRegisterFileRegisterIDs List of IDs for the registers of the given register file New in 1.5
getRegisterFileRegisterFileIDs List of IDs for the register files of the given register file New in 1.5

Register Operations

NameDescriptionCompatability
Restrictions
getRegisterDimensions Dimensions of a register array.  
getRegisterAddressOffset The offset from the base address.  
getRegisterAlternateRegisterIDs List of IDs for the alternate registers of the given register New in 1.5
getRegisterTypeIdentifier Indicates the type identifier of this register. New in 1.5
getRegisterAccess The accessibility of the data in the register  
getRegisterSize The register size in bits., Configurable  
setRegisterSize Set the register size in bits., Configurable  
getRegisterVolatility Indicates whether or not the data is volatile. Modified in 1.5
getRegisterResetValue Register value at reset., Configurable Modified in 1.5
setRegisterResetValue Set register value at reset., Configurable Modified in 1.5
getRegisterResetMask Mask to be ANDed with the value before comparing to reset value., Configurable Modified in 1.5
setRegisterResetMask Set the mask to be ANDed with the value before comparing to reset value., Configurable Modified in 1.5
getRegisterFieldIDs List of IDs for the fields of the given register Modified in 1.5
getRegisterAlternateGroups Indicates the group names for an alternate register. New in 1.5

Remap Operations

NameDescriptionCompatability
Restrictions
getRemapStatePortIDs List of remap port IDs of a remap state  
getRemapStatePortPortID Port ID for the remap state  
getRemapStatePortPortIndex Index of the port if a vector for the remap state  
getRemapStatePortPortValue Value of the port for the remap state  

Service Operations

NameDescriptionCompatability
Restrictions
getAbstractionDefServiceInitiative Port service initiative from the abstraction definition  
getAbstractionDefServiceIDs List of typeDefs for an abstractionServiceID Invalid in 1.5
getAbstractionDefAbstractionServiceTypeDefIDs List of type definitions for an abstractionServiceID New in 1.5
getServiceInitiative Initiative of the service  
getServiceTypeDefIDs List of typeDefs for a serviceID Modified in 1.5

TypeDef Operations

NameDescriptionCompatability
Restrictions
getTypeDefTypeName Name of the type Modified in 1.5
getTypeDefConstrained Is the type name constrained Modified in 1.5
getTypeDefImplicit Is the type name implicit Modified in 1.5
getTypeDefTypeDefinitions List of type definition for the given type Modified in 1.5
getTypeDefTypeViewIDs List of type viewIDs for the given type Modified in 1.5

View Operations

NameDescriptionCompatability
Restrictions
getViewDesignID ID of the design associated with a hierarchical view  
getViewEnvIdentifiers List of environment identifiers of the view  
getViewLanguage View Language  
getViewLanguageIsStrict Value of 'strict' attribute on view language element  
getViewModelName Get the model name for this view  
getViewDefaultFileBuilderIDs List of default file builder IDs of the view  
getViewFileSetIDs List of fileSet IDs for fileSets referenced by the view  
getViewPortConstraintSetIDs Constraint set ID for the port referenced by the view Modified in 1.5
getViewWhiteboxElementRefIDs List of whitebox element reference IDs of the view  

Whitebox Operations

NameDescriptionCompatability
Restrictions
getWhiteboxElementRefID White box element reference ID  
getWhiteboxRefPathIDs List of path IDs of the white box element reference  
getWhiteboxRefPathName Name of the whitebox reference path element  
getWhiteboxRefPathRange List of left and right range of the whitebox reference path element  
getWhiteboxElementType Type of the whitebox element  
getWhiteboxElementDrivable Indicates whether or not the whitebox element is drivable  
getWhiteboxElementRegisterID Register reference ID of the whitebox element Invalid in 1.5
getWhiteboxElementRegisterIDs Register reference IDs of the whitebox element New in 1.5


Abstraction Definition Operations


getAbstractionDefID

Description: ID for the abstraction definition with the given VLNV 

getAbstractionDefVLNV

Description: Vendor Library Name Version of the abstraction definition 

getAbstractionDefBusTypeVLNV

Description: Get VLNV of the bus definition 

getAbstractionDefPortIDs

Description: List of abstraction definition port element IDs 

getAbstractionDefPortLogicalName

Description: Logical name of this abstraction definition port 

getAbstractionDefPortRequiresDriver

Description: Does this port require a driver 

getAbstractionDefPortRequiredDriverType

Description: Required driver type for this port 

getAbstractionDefPortStyle

Description: Returns 'wire' or 'transactional' to indicate the port style 

getAbstractionDefPortIsAddress

Description: Is this port an address port 

getAbstractionDefPortIsData

Description: Is this port a data port 

getAbstractionDefPortIsClock

Description: Is this port a clock port 

getAbstractionDefPortIsReset

Description: Is this port a reset port 

getAbstractionDefPortModeID

Description: Returns an array of IDs for accessing the given port in the given interface mode. The array shall only contain one element.- Modified in 1.5

getAbstractionDefPortModeGroup

Description: Group name when present on a system interface 

getAbstractionDefPortModeBitWidth

Description: Bit width constraint when present on an interface of the given type 

getAbstractionDefPortModeDirection

Description: Port direction constraint when present on an interface of the given type 

getAbstractionDefPortNonMirroredConstraintIDs

Description: List of constraint IDs for a non-mirrored port 

getAbstractionDefPortMirroredConstraintIDs

Description: List of constraint IDs for a mirrored port 

getAbstractionDefPortDriveConstraintIDs

Description: List of drive constraint IDs of the port 

getAbstractionDefPortLoadConstraintIDs

Description: List of load constraint IDs of the port 

getAbstractionDefPortTimingConstraintIDs

Description: List of timing constraint IDs of the port 

getAbstractionDefPortDefaultValue

Description: Default value for port when not connected 

getAbstractionDefPortModePresence

Description: Existence requirement for this port on an interface of the given type 

getAbstractionDefPortModeServiceIDs

Description: AbstractionDef service IDs on a transactional port- Invalid in 1.5

getAbstractionDefPortModeServiceID

Description: AbstractionDef service ID on a transactional port- New in 1.5


Abstractor Instance Operations


getAbstractorInstanceName

Description: Instance name of the abstractor 

getAbstractorInstanceVLNV

Description: Vendor Library Name Version of the abstractor (from the design file) 

getAbstractorInstanceAbstractorID

Description: ID for the abstractor associated with given instance (crossing from design configuration to abstractor file) 

getAbstractorInstanceXML

Description: Return the abstractor XML in text format. Schema version is DE dependent. 


Abstractor Operations


getAbstractorAbstractorMode

Description: Get the mode that the abstractor can be master, slave, direct or system. 

getAbstractorBusTypeVLNV

Description: List of VLNV of the bus definition 

getAbstractorAbstractorInterfaceIDs

Description: List of 2 interface IDs 

getAbstractorViewIDs

Description: A list of model view IDs 

getAbstractorPortIDs

Description: A list of abstractor model port IDs 

getAbstractorModelParameterIDs

Description: A list of model parameter IDs 

getAbstractorGeneratorIDs

Description: List of generator IDs of the abstractor  

getAbstractorChoiceIDs

Description: List of choices IDs 

getAbstractorFileSetIDs

Description: List of file set IDs 


Address Map Operations


getAddressSpaceRange

Description: The address range of an address block expressed as the number of accessable and addressable units. 

getAddressSpaceWidth

Description: The bit width of an address block. 

getAddressSpaceLocalMemoryMapID

Description: The ID for the local mamory map of the address space.- New in 1.5

getAddressSpaceSegmentIDs

Description: List of IDs for address block segments for the address space.- New in 1.5

getSegmentAddressOffset

Description: The address offset of an address space segment in an address space- New in 1.5

setSegmentAddressOffset

Description: Set the address offset of an address space segment expressed in the number addressable units.- New in 1.5

getSegmentRange

Description: The address range of a address space segment expressed as the number of accessable addressable units.- New in 1.5

setSegmentRange

Description: Set the address range of an address space segment expressed as the number of accessable addressable units.- New in 1.5

getAddressSpaceAddressUnitBits

Description: The number bits in an addressable unit. If none exists, the default 8 bits is returned. 

getExecutableImageIDs

Description: The IDs of the executable images belonging to the specified address space. 

getExecutableImageType

Description: The type of the executable image if existent. 

getExecutableImageLinkerCommand

Description: The linkder command for the current executable image. 

getExecutableImageLinkerFlags

Description: The flags of the current executable image linker command. 

getExecutableImageLinkerCommandFileID

Description: Element ID of linkerCommandFile associated with given executable image. 

getExecutableImageFileBuilderIDs

Description: List of default file builder IDs of the executable image 

getExecutableImageFileSetIDs

Description: The group of file set reference IDs complying with the tool set of the current executable image. 

getLinkerCommandFileName

Description: The name of the linker command file. 

getLinkerCommandFileLineSwitch

Description: The command line switch to specify with the linker command file. 

getLinkerCommandFileEnable

Description: Indicates whether or not to generate and enable the linker command file. 

getLinkerCommandGeneratorIDs

Description: Reference IDs to the generator elements for generating the linker command file. 

getMemoryMapElementIDs

Description: List of element IDs (addressBlockID, bankID, subspaceMapID) within a memory map, memory remap, local memory map, or bank- Modified in 1.5

getMemoryMapElementType

Description: Indicates type of memory map element: addressBlock, bank or subspaceMap 

getMemoryMapAddressUnitBits

Description: The number bits in an addressable unit for a memory map. If none exists, the default 8 bits is returned. 

getAddressBlockBaseAddress

Description: The base address of an address block 

getAddressBlockTypeIdentifier

Description: Indicates the type identifier of this address block.- New in 1.5

getAddressBlockRange

Description: The address range of an address block expressed as the number of accessable and addressable units. 

getAddressBlockWidth

Description: The bit width of an address block in the local memory map. 

getAddressBlockUsage

Description: Indicates the usage of this address block. 

getAddressBlockVolatility

Description: Indicates whether or not the data is volatile. 

getAddressBlockAccess

Description: The accessibility of the data in the local address block. 

getAddressBlockRegisterIDs

Description: The IDs of the available registers in the address block. 

getAddressBlockRegisterFileIDs

Description: The IDs of the available register files in the address block.- New in 1.5

getBankAlignment

Description: The bank alignment value, serial or parallel 

getBankBaseAddress

Description: The base address of an address bank 

getBankUsage

Description: Indicates the usage of this address bank. 

getBankVolatility

Description: Indicates whether or not the data is volatile. 

getBankAccess

Description: The accessibility of the data in the local address bank. 

getSubspaceMapMasterID

Description: Master bus interface ID on the other side of a bus bridge . 

getSubspaceMapSegmentID

Description: Address space segment ID on the other side of a bus bridge .- New in 1.5

getSubspaceMapBaseAddress

Description: The base address of a memory subspace 

getMemoryMapRemapElementIDs

Description: List of IDs for memory map 'remap' elements of the given memory map 

getMemoryRemapStateID

Description: Remap State ID for which this remap is applicable 

setAddressSpaceRange

Description: Set the address range of an address block expressed as the number of accessable and addressable units. 

setAddressSpaceWidth

Description: Set the bit width of an address block. 

setExecutableImageLinkerCommand

Description: Set the linkder command for the current executable image. 

setExecutableImageLinkerFlags

Description: Set the flags of the current executable image linker command. 

setLinkerCommandFileName

Description: Set the name of the linker command file. 

setLinkerCommandFileLineSwitch

Description: Set the command line switch to specify with the linker command file. 

setLinkerCommandFileEnable

Description: Set whether or not to generate and enable the linker command file. 

setAddressBlockBaseAddress

Description: Set the base address of an address block 

setAddressBlockRange

Description: Set the address range of an address block expressed as the number of accessable and addressable units. 

setAddressBlockWidth

Description: Set the bit width of an address block 

setBankBaseAddress

Description: Set the base address of an address bank 

setSubspaceMapBaseAddress

Description: Set the base address of a memory subspace 


Bus Definition Operations


getBusDefinitionID

Description: ID for the bus definition with the given VLNV 

getBusDefinitionVLNV

Description: Vendor Library Name Version of the bus definition 

getBusDefinitionDirectConnection

Description: Indicates whether or not the bus definition supports direct connections 

getBusDefinitionIsAddressable

Description: Indicates whether or not the bus definition is an addressable bus 

getBusDefinitionExtends

Description: Vendor Library Name Version of the bus definition being extended 

getBusDefinitionMaxMasters

Description: Maximum # of masters supported by this bus definition 

getBusDefinitionMaxSlaves

Description: Maximum # of slaves supported by this bus definition 

getBusDefinitionSystemGroupNames

Description: List of system group names for this bus definition 


Bus Interface Operations


getBusInterfaceMasterAddressSpaceID

Description: ID of the master addressSpace 

getBusInterfaceMasterBaseAddress

Description: Base address of the master addressSpace 

getBusInterfaceSlaveMemoryMapID

Description: ID of the memoryMap referenced from a slave interface 

getBusInterfaceSlaveBridgeIDs

Description: List of slave bridge IDs 

getBridgeMasterID

Description: The slave interface master interface reference ID 

getBridgeIsOpaque

Description: Value of the opaque attribute 

getBusInterfaceSlaveFileSetGroupIDs

Description: List of fileSetGroup IDs 

getBusInterfaceGroupName

Description: Group name of a system, mirroredSystem, or monitor bus interface 

getBusInterfaceMirroredSlaveRemapAddressIDs

Description: List of remap address IDs of the mirrored slave interface 

getRemapAddressValue

Description: Remap address of the given remap address element 

getRemapAddressRemapStateID

Description: Remap state ID of the given remap address element 

getBusInterfaceMirroredSlaveRange

Description: The address range of the mirrored slave interface 

getBusInterfaceMonitorInterfaceMode

Description: Indicates the mode of interface being monitored, slave, master, system, mirrorslave, mirrormaster or mirrorslave 

getBusInterfaceConnectionRequired

Description: Connection required for this bus interface 

getBusInterfaceBitSteering

Description: BitStreering description of the bus interface: on or off 

getBusInterfaceEndianness

Description: The endianess of the bus interface, big or little. The default is little. 

getBusInterfaceBitsInLAU

Description: The number bits in the least addressable unit. If none exists, the default 8 bits is returned. 

setBusInterfaceMasterBaseAddress

Description: Set base address of the master bus interface. 

setRemapAddressValue

Description: Set remap address value for the associated interface. 

setBusInterfaceMirroredSlaveRange

Description: Set address range for the associated interface. 

setBusInterfaceBitSteering

Description: Set bus interface bit steering value. 


Component Instance Operations


getComponentInstanceName

Description: Instance name of the component 

getComponentInstanceVLNV

Description: Vendor Library Name Version of the component (from the design file) 

getComponentInstanceComponentID

Description: ID for the component associated with given instance (crossing from design to component file) 

getComponentInstanceXML

Description: Return the component XML in text format. Schema version is DE dependent. 


Component Operations


getComponentVLNV

Description: Vendor Library Name Version of the component (from the component file) 

getComponentElementType

Description: Returns the name of the XML element associated with the component (currently only 'component'). This call is being provided to cover a future scenario where there can be different types of component elements instantiated in a design (e.g. macroComponent elements). 

getChannelBusInterfaceIDs

Description: List of busInterface IDs in this channel 

getComponentAddressSpaceIDs

Description: List of IDs for the logical address spaces in the component. 

getComponentRemapStateIDs

Description: A list of remap state IDs 

getComponentViewIDs

Description: A list of model view IDs 

getComponentBusInterfaceIDs

Description: List of interface IDs 

getComponentChannelIDs

Description: A list of channel IDs 

getComponentPortIDs

Description: A list of component model port IDs 

getComponentModelParameterIDs

Description: A list of model parameter IDs 

getComponentGeneratorIDs

Description: List of generator IDs of the component  

getComponentChoiceIDs

Description: List of choices IDs 

getComponentFileSetIDs

Description: List of file set IDs 

getComponentWhiteboxElementIDs

Description: List of whitebox element IDs of the component  

getComponentCpuIDs

Description: List of cpu IDs of the component  

getCpuAddressSpaceIDs

Description: List of address space reference IDs of the cpu 

getComponentOtherClockDriverIDs

Description: List of clock driver IDs of the component  

getComponentMemoryMapIDs

Description: List of IDs for memory map elements in the given component 


Constraint Operations


getPortConstraintSetReferenceName

Description: Reference name of the given port constraint set 

getPortConstraintSetRange

Description: List of the left and right range of a port referenced by this constraint set 

getPortConstraintSetDriveConstraintIDs

Description: List of drive constraint IDs of the port 

getPortConstraintSetLoadConstraintIDs

Description: List of load constraint IDs of the port 

getPortConstraintSetTimingConstraintIDs

Description: List of timing constraint IDs of the port 

getDriveConstraintType

Description: Indicates the type of drive constraint: function class 

getDriveConstraintValue

Description: Returns the drive constraint. Format depends on the constraint type. 

getLoadConstraintType

Description: Indicates the type of load constraint: function class 

getLoadConstraintValue

Description: Returns the load constraint. Format is cell function and strength or cell class and strength. 

getLoadConstraintCount

Description: Returns the load constraint count, the number of loads. 

getTimingConstraintClockDetails

Description: Indicates the clock name, clock edge, and delay type 

getTimingConstraintValue

Description: Returns the timing constraint value (cycle time percentage). 


Design Operations


getDesignID

Description: Get ID of the current or top design 

getDesignVLNV

Description: Vendor Library Name Version of the design 

getDesignComponentInstanceIDs

Description: Components instances IDs of the given design 

getComponentInstanceID

Description: Return the component instance ID of the named component instance in the given design 

getDesignInterconnectionIDs

Description: List of interconnection element IDs 

getInterconnectionActiveInterfaces

Description: Returns the active interfaces as a list: componentRef interfaceRef componentRef interfaceRef- Modified in 1.5

getDesignInterconnectionAbstractorInstanceIDs

Description: List of abstractor instances IDs for this interconnection 

getDesignMonitorInterconnectionIDs

Description: List of monitorInterconnection element IDs 

getMonitorInterconnectionInterfaces

Description: Returns the active interface and monitor interfaces as a list in componentPathRef, componentRef, componentInterface, monitorPathRef, monitorRef, monitorInterface format, the active interface comes first in the list.- Modified in 1.5

getDesignAdHocConnectionIDs

Description: List of ad-hoc connection element IDs 

getAdHocConnectionTiedValue

Description: Get the tied value for an ad-hoc connection 

getAdHocConnectionInternalPortReferenceIDs

Description: List of internal ad-hoc port reference element IDs 

getAdHocConnectionInternalPortReferenceDetails

Description: List for an internal connection containing the componentRef, portRef, left, and right attribute values 

getAdHocConnectionExternalPortReferenceIDs

Description: List of external ad-hoc port reference element IDs 

getAdHocConnectionExternalPortDetails

Description: List for an external connection containing the portRef, left, and right attribute values 

getDesignHierConnectionIDs

Description: List of hierarchical connection element IDs 

getHierConnectionDetails

Description: List containing the interface name, component reference, and interface reference 

addComponentInstance

Description: Add new component instance. 

removeComponentInstance

Description: Remove specified component instance. 

replaceComponentInstance

Description: Replace specified component with new provided component. 

appendAbstractorInstance

Description: Append a new abstractor instance to the interconnection. 

removeAbstractorInstance

Description: Remove specified abstractor instance. 

replaceAbstractorInstance

Description: Replace specified abstractor with new provided abstractor. 

addInterconnection

Description: Add new interconnection between components. 

removeInterconnection

Description: Remove interconnection between components, and any abstractors if present. 

addMonitorInterconnection

Description: Add new interconnection between a component and monitor. If there is already a monitorInterconnection for the given componentRef/componentInterfaceRef, then the monitor connection is added to that element. 

addHierarchicalMonitorInterconnection

Description: Add new hierarchical interconnection between a component and monitor. If there is already a monitorInterconnection for the given componentRef/componentInterfaceRef, then the monitor connection is added to that element.- New in 1.5

removeMonitorInterconnection

Description: Remove interconnection between a component and monitor. When the last monitor reference is removed, the entire monitorInterconnection element will be removed. 

removeHierarchicalMonitorInterconnection

Description: Remove a hierarchical interconnection between a component and monitor. When the last monitor reference is removed, the entire monitorInterconnection element will be removed.- New in 1.5

addHierConnection

Description: Add new hierarchical connection. 

removeHierConnection

Description: Remove existing hierarchical connection. 

addAdHocConnection

Description: Add new ad-hoc connection. 

addAdHocInternalPortReference

Description: Add an internal port reference to an existing add-hoc connection. An identical port reference must not already exist in the ad-hoc connection. 

addAdHocExternalPortReference

Description: Add an external port reference to an existing add-hoc connection. 

removeAdHocInternalPortReference

Description: Remove an internal port from existing ad-hoc connection. The ad-hoc connection is removed when the last port reference is removed. 

removeAdHocExternalPortReference

Description: Remove an external port reference from existing ad-hoc connection. 


Field Operations


getRegisterFieldBitOffset

Description: Bit offset of the fields LSB inside the register. 

getFieldTypeIdentifier

Description: Indicates the type identifier of this field.- New in 1.5

getRegisterFieldBitWidth

Description: Width of the field in bits. 

setRegisterFieldBitWidth

Description: Set the width of the field in bits. 

getRegisterFieldVolatility

Description: Indicates whether or not the data is volatile. The presumed value is 'false' if the element is not present.- Modified in 1.5

getRegisterFieldAccess

Description: The accessibility of the data in the field. 

getRegisterFieldValueIDs

Description: List of IDs for field values for the given register field. 

getRegisterFieldValueUsage

Description: Enumerated bit field usage.- New in 1.5

getRegisterFieldValue

Description: Enumerated bit field value. 

getRegisterFieldValueName

Description: Enumerated name for this register field value. Deprecated - use getName. 

getFieldModifiedWriteValue

Description: The modified write value for the field- New in 1.5

getFieldWriteValueConstraintWriteAsRead

Description: The write value constraint is write as read.- New in 1.5

getFieldWriteValueConstraintUseEnumeratedValues

Description: The write value constraint shall use the enumerated values.- New in 1.5

getFieldWriteValueConstraintMinMax

Description: The value of a write constraint.- New in 1.5

getFieldReadAction

Description: The read action for the field- New in 1.5

getFieldTestable

Description: True if the field can be tested with a simple register test.- New in 1.5

getFieldTestConstraint

Description: The test constraint required if the field can be tested with a simple register test.- New in 1.5


File and Fileset Operations


getFileSetGroupName

Description: Name of file set group 

getFileSetGroupFileSetIDs

Description: List of file set IDs in this file set group 

getFileName

Description: Get name of the given fileID. 

getFileBuilderFileType

Description: FileType or userFileType of the file builder 

getFileBuilderCommand

Description: Command of the file builder 

getFileBuilderFlags

Description: Flags of the file builder 

getFileBuilderReplaceDefaultFlags

Description: Value of the replaceDefaultFlags element of the file builder 

getFileSetGroups

Description: List of group names of the file set  

getFileSetFileIDs

Description: List of file IDs of the file set  

getFileType

Description: FileType or userFileType of the file 

getFileIsIncludeFile

Description: Indicates that the given file is an include file 

getFileHasExternalDeclarations

Description: Indicates that the file includes external declarations required by the top-level netlist file 

getFileLogicalName

Description: Logical name of the file  

getFileLogicalNameDefault

Description: Default attribute of logical name of the file  

getFileExportedNames

Description: List of exported names of the file  

getFileBuildCommandName

Description: Name of the build command of the file  

getFileBuildCommandFlags

Description: Flags of the file build command 

getFileBuildCommandFlagsIsAppend

Description: Value of append attribute on the flag element 

getFileBuildCommandReplaceDefaultFlags

Description: Indicates whether or not to replace default flags 

getFileBuildCommandTargetName

Description: Target name of the file build command  

getFileDependencies

Description: List of dependent locations for the file, typically directories 

getFileDefineSymbolIDs

Description: List of define symbol IDs used in the file 

getFileImageTypes

Description: List of image types of the file 

getFileSetFileBuilderIDs

Description: List of file builder IDs used for this fileSet 

getFileSetDependencies

Description: List of dependent locations for the fileSet, typically directories 

getFileSetFunctionIDs

Description: List of function IDs 

getFunctionReplicate

Description: Value of replicate attribute on function element 

getFunctionEntryPoint

Description: Entry point of the function 

getFunctionFileID

Description: File ID containing the function entry point 

getFunctionReturnType

Description: Return type of the function 

getFunctionArgumentIDs

Description: List of argument IDs of the function of the file set 

getFunctionArgumentDataType

Description: Data type of the argument 

getFunctionDisabled

Description: Indicates whether or not the function is disabled  

getFunctionSourceFileIDs

Description: List of source file IDs of the function of the file set  

getFunctionSourceFileName

Description: Name of the source file  

getFunctionSourceFileType

Description: FileType or userFileType of the source file  

setFileName

Description: Set name of the given file. 

setFileBuildCommandName

Description: Set command name for the given file builder. 

setFileBuildCommandFlags

Description: Set command flags for the given file builder. 

setFileBuildCommandReplaceDefaultFlags

Description: Set replace default flags for the given file builder. 

setFileBuildCommandTargetName

Description: Set target name for build command for the given file 

setFileBuilderCommand

Description: Set command associated with file builder. 

setFileBuilderFlags

Description: Set flags associated with the given file builder. 

setFileBuilderReplaceDefaultFlags

Description: Set value of replace default flags in file builder. 

setFunctionDisabled

Description: Set disable flag on function. 


Generator Operations


getGeneratorScope

Description: Scope of the generator  

getGeneratorIsHidden

Description: Value of hidden attribute on the generator 

getGeneratorPhase

Description: Phase number of the generator  

getGeneratorPhaseScope

Description: Scope of generator phase: local or global 

getGeneratorApiType

Description: Api type of the generator 

getGeneratorExecutable

Description: Executable name associated with the generator  

getGeneratorGroups

Description: List of group names of the generator 

getGeneratorTransportMethods

Description: List of transport methods of the generator 


Interface Operations


getInterfaceBusTypeVLNV

Description: List of VLNV of the bus definition 

getInterfaceAbstractionTypeVLNV

Description: List of VLNV of the abstraction definition 

getInterfaceMode

Description: Mode of the interface: master, slave, system, mirroredMaster, mirroredSlave, mirroredSystem or monitor 

getInterfacePortMapIDs

Description: List of interface port map IDs 

getLogicalPhysicalMapIDs

Description: List of the logical and physical port map IDs 

getPortMapRange

Description: List of left and right range of the port map 

setPortMapRange

Description: Set left/right range of an interface port map. 


Miscellaneous Operations


getVendorExtensions

Description: Returns the complete XML text of the vendor extension element including the spirit:vendorExtension tag, as a well formed XML document. 

getVendorAttribute

Description: Get vendor defined attribute from the given element 

getParameterIDs

Description: List of parameter IDs from the given element (any which contains spirit:parameter elements) 

getValue

Description: Get the value of a parameterID, fileDefineIDs or argumentIDs. 

getValueAttribute

Description: Returns the value of the given attribute name on the elementID/value element 

getModelParameterDataType

Description: Data type of the model parameter 

getModelParameterUsageType

Description: Usage type of the model parameter 

getIdValue

Description: Return the value of the spirit:id attribute on a ID- New in 1.5

getIDType

Description: Return the name of the ID type- New in 1.5

getName

Description: Return the name of the specified element- Modified in 1.5

getDescription

Description: Return the description of the specified element- Modified in 1.5

getDisplayName

Description: Return the displayName of the specified element- Modified in 1.5

getUnconfiguredID

Description: Return the unconfigured ID from a configured ID- New in 1.5

getChoiceName

Description: Name of the choice  

getChoiceEnumerationIDs

Description: List of choice enumeration IDs of the choice  

getChoiceEnumerationValue

Description: Value of the enumeration element 

getChoiceEnumerationText

Description: Value of the enumeration text attribute 

getChoiceEnumerationHelp

Description: Value of the enumeration help attribute 

registerVLNV

Description: Indicate to DE where the file resides for the IP-XACT element with the given VLNV. 

getXMLForVLNV

Description: Return XML of the IP-XACT object identified by the given VLNV. 

getGeneratorContextComponentInstanceID

Description: ID for the component instance associated with the currently invoked generator 

init

Description: API initialization function. Must be called before any other API call. 

message

Description: Send message level and message text to Design Environment. 

getErrorMessage

Description: Get error message from prior callback. 

getWarningCount

Description: Return count of how many potentially incompatible API calls have been made. 

end

Description: Terminate connection to the Design Environment. 

setVendorExtensions

Description: Set vendor extensions. NOTE: This call is only supported for elements within a spirit:design. 

setVendorAttribute

Description: Set vendor defined attribute on the given element 

setValue

Description: Set the value of a parameterID, fileDefineIDs or argumentIDs. 


Port Operations


getPortStyle

Description: Returns 'wire' or 'transactional' to indicate the port style 

getPortDirection

Description: Direction of the port 

getPortRange

Description: List of the left and right range of the port 

getPortWireTypeDefIDs

Description: List of typeDefs for a wire portID- New in 1.5

getPortTransactionalTypeDefID

Description: The type definition for a transactional portID- New in 1.5

getPortServiceID

Description: ID of element representing the service of a transactional port 

getPortAccessType

Description: Indicates the access type for this port- Modified in 1.5

getPortAccessHandle

Description: Alternate name to be used when accessing this port- Modified in 1.5

getPortMaxAllowedConnections

Description: Max allowed connections for this transactional port 

getPortMinAllowedConnections

Description: Min allowed connections for this transactional port 

getPortDefaultValue

Description: Default value of the port, if not set returns "" 

getPortClockDriverID

Description: Element ID of clock driver element, if present 

getClockDriverPeriod

Description: Clock period of the given clock 

getClockDriverPulseOffset

Description: Clock pulse offset of the given clock 

getClockDriverPulseValue

Description: Clock pulse value of the given clock 

getClockDriverPulseDuration

Description: Clock period of the given clock 

getClockDriverName

Description: Name of the clock driver 

getClockDriverSource

Description: Source name of the clock driver 

getPortSingleShotDriverID

Description: Element ID of single shot driver element, if present 

getPortSingleShotPulseOffset

Description: Clock pulse offset of the port 

getPortSingleShotPulseValue

Description: Clock pulse value of the port 

getPortSingleShotPulseDuration

Description: Clock period of the port 

getPortConstraintSetIDs

Description: List of constraint sets IDs of the port 

setPortRange

Description: Set left/right range for the given port. 

setPortDefaultValue

Description: Set default value of the given port. 

setClockDriverPeriod

Description: Set period of the given clock port. 

setClockDriverPulseOffset

Description: Set pulse offset value of the given clock port. 

setClockDriverPulseValue

Description: Set pulse value of the given clock port. 

setClockDriverPulseDuration

Description: Set pulse duration of the given clock port. 

setPortSingleShotPulseOffset

Description: Set pulse offset of given single shot port. 

setPortSingleShotPulseValue

Description: Set pulse value of given single shot port. 

setPortSingleShotPulseDuration

Description: Set pulse duration of given single shot port. 


Register File Operations


getRegisterFileDimensions

Description: Dimensions of a register file array.- New in 1.5

getRegisterFileAddressOffset

Description: The offset from the base address.- New in 1.5

getRegisterFileTypeIdentifier

Description: Indicates the type identifier of this register file.- New in 1.5

getRegisterFileRange

Description: The register file range in number of addressable units.- New in 1.5

setRegisterFileRange

Description: Set the register file range in addressable units.- New in 1.5

getRegisterFileRegisterIDs

Description: List of IDs for the registers of the given register file- New in 1.5

getRegisterFileRegisterFileIDs

Description: List of IDs for the register files of the given register file- New in 1.5


Register Operations


getRegisterDimensions

Description: Dimensions of a register array. 

getRegisterAddressOffset

Description: The offset from the base address. 

getRegisterAlternateRegisterIDs

Description: List of IDs for the alternate registers of the given register- New in 1.5

getRegisterTypeIdentifier

Description: Indicates the type identifier of this register.- New in 1.5

getRegisterAccess

Description: The accessibility of the data in the register 

getRegisterSize

Description: The register size in bits. 

setRegisterSize

Description: Set the register size in bits. 

getRegisterVolatility

Description: Indicates whether or not the data is volatile.- Modified in 1.5

getRegisterResetValue

Description: Register value at reset.- Modified in 1.5

setRegisterResetValue

Description: Set register value at reset.- Modified in 1.5

getRegisterResetMask

Description: Mask to be ANDed with the value before comparing to reset value.- Modified in 1.5

setRegisterResetMask

Description: Set the mask to be ANDed with the value before comparing to reset value.- Modified in 1.5

getRegisterFieldIDs

Description: List of IDs for the fields of the given register- Modified in 1.5

getRegisterAlternateGroups

Description: Indicates the group names for an alternate register.- New in 1.5


Remap Operations


getRemapStatePortIDs

Description: List of remap port IDs of a remap state 

getRemapStatePortPortID

Description: Port ID for the remap state 

getRemapStatePortPortIndex

Description: Index of the port if a vector for the remap state 

getRemapStatePortPortValue

Description: Value of the port for the remap state 


Service Operations


getAbstractionDefServiceInitiative

Description: Port service initiative from the abstraction definition 

getAbstractionDefServiceIDs

Description: List of typeDefs for an abstractionServiceID- Invalid in 1.5

getAbstractionDefAbstractionServiceTypeDefIDs

Description: List of type definitions for an abstractionServiceID- New in 1.5

getServiceInitiative

Description: Initiative of the service 

getServiceTypeDefIDs

Description: List of typeDefs for a serviceID- Modified in 1.5


TypeDef Operations


getTypeDefTypeName

Description: Name of the type- Modified in 1.5

getTypeDefConstrained

Description: Is the type name constrained- Modified in 1.5

getTypeDefImplicit

Description: Is the type name implicit- Modified in 1.5

getTypeDefTypeDefinitions

Description: List of type definition for the given type- Modified in 1.5

getTypeDefTypeViewIDs

Description: List of type viewIDs for the given type- Modified in 1.5


View Operations


getViewDesignID

Description: ID of the design associated with a hierarchical view 

getViewEnvIdentifiers

Description: List of environment identifiers of the view 

getViewLanguage

Description: View Language 

getViewLanguageIsStrict

Description: Value of 'strict' attribute on view language element 

getViewModelName

Description: Get the model name for this view 

getViewDefaultFileBuilderIDs

Description: List of default file builder IDs of the view 

getViewFileSetIDs

Description: List of fileSet IDs for fileSets referenced by the view 

getViewPortConstraintSetIDs

Description: Constraint set ID for the port referenced by the view- Modified in 1.5

getViewWhiteboxElementRefIDs

Description: List of whitebox element reference IDs of the view 


Whitebox Operations


getWhiteboxElementRefID

Description: White box element reference ID 

getWhiteboxRefPathIDs

Description: List of path IDs of the white box element reference 

getWhiteboxRefPathName

Description: Name of the whitebox reference path element 

getWhiteboxRefPathRange

Description: List of left and right range of the whitebox reference path element 

getWhiteboxElementType

Description: Type of the whitebox element 

getWhiteboxElementDrivable

Description: Indicates whether or not the whitebox element is drivable 

getWhiteboxElementRegisterID

Description: Register reference ID of the whitebox element- Invalid in 1.5

getWhiteboxElementRegisterIDs

Description: Register reference IDs of the whitebox element- New in 1.5

All ID Types

Each item is a link to a function call that can return this type of ID. If there is more than one function then the return variable will be a link to the second function in the list, and so on. The last function in the list will be a BOLD link and will return to the first function.

abstractionDefID abstractionDefPortID abstractionDefPortModeConstraintID abstractionDefPortModeID
abstractionServiceID abstractionServiceTypeDefID abstractorID abstractorInstanceID
adHocConnectionID adHocExternalPortReferenceID adHocInternalPortReferenceID addressBlockID
addressBlockUID addressSpaceID addressSpaceUID alternateRegisterID
alternateRegisterUID argumentID argumentUID bankID
bankUID bridgeID busdefID channelID
choiceEnumerationID choiceID clockDriverID clockDriverUID
componentID componentInstanceID cpuID designID
driveConstraintID elementID executableImageID executableImageUID
fileBuilderID fileBuilderUID fileDefineID fileDefineUID
fileID fileSetGroupID fileSetID fileUID
functionID functionSourceFileID functionUID generatorID
hierConnectionID interconnectionID interfaceID interfacePortMapID
interfaceUID linkerCommandFileID linkerCommandFileUID loadConstraintID
localMemoryMapID memoryMapElementID memoryMapID memoryRemapID
monitorInterconnectionID parameterID parameterUID portConstraintSetID
portID portMapID portMapUID portUID
regFieldID regFieldUID regFieldValueID registerFileID
registerFileUID registerID registerUID remapAddressID
remapStateID remapStatePortID segmentID segmentUID
serviceID serviceTypeDefID singleShotDriverID singleShotDriverUID
subspaceMapID subspaceMapUID timingConstraintID transactionalTypeDefID
typeDefID viewID whiteboxElementID whiteboxRefID
whiteboxRefPathID wireTypeDefID

© Copyright Accellera Systems Initiative. All rights reserved.